User guide

Using the NiTek Trio

40 NiTek Trio Dive Computer User Manual v1.2

Profile mode

Profile mode enables you to see a record of the depths you reached at

various points during a dive. You can display a detailed profile of each

dive stored in the log. When a dive is selected, the computer

automatically displays the depth and the time in the dive when you

reached that depth until it reaches the end of the dive.

Dive profile information is either stored in 10- or 30-second intervals

during a dive. This must be set in dive mode before a dive. Refer to

“Setting the dive profile sampling rate” for more information.

The dive number and date of the dive are displayed when you scroll

through the dives. This makes it easy to find the dive profile you want

to view.

Dive Profile mode

(1) Dive log entry number: This is the dive number that corresponds

to the dive number when in log mode.

(2) Dive time: This tells you at what time during the dive you reached

the depth indicated.

(3) Number of dives per day: This corresponds to the number of

dives per day.

(4) Depth: This is the depth that corresponds to the displayed dive

time. Depending on what profile sampling rate you have set, either two

depth readings (30-second rate) or six depth readings (10-second rate)

are displayed for each minute during a dive.

(5) Depth graph: This is a graphical view of the entire dive, with the

moving point of the dive at that time.

To view a dive profile:

1. Repeatedly press Mode until the logbook function graph is

displayed at the top of the screen.