User guide

Using the NiTek Trio

NiTek Trio Dive Computer User Manual v1.2 15

3. Slowly rotate the compass in a circle until “ROTATE OK” is

displayed at the top of the screen.

4. Press and hold Set again for 4-5 seconds until the heading display

and time is shown once more.

Saving a compass heading

You can save a heading on the compass display to return to later, or to

remind you of a heading to follow.

Saved compass heading

(1) Angular display, in cardinal points and degrees

(2) Current time

(3) Saved heading

To save a heading in the compass:

1. Repeatedly press Mode until the heading display and time is

shown.

2. Press and hold Select for 4-5 seconds until the heading display and

time is displayed at the top of the screen.

The saved heading will be displayed to the left of the time readout.

A small arrow indicating the saved heading will also be displayed

above the angular display, if the saved heading is within 45

degrees of the current heading.

Note: The reciprocal of your heading will also be indicated with a

symbol in the display.

3. To erase/remove the saved heading, press and hold Select again for

4-5 seconds until the heading display and time is shown once

more.