Technical data

FSG 2T PS
Portable VHF/AM Airband Transceiver
46 DITTEL  D10077 May 2010
Switch off the radio and disconnect the test wiring harness.
Assemble the radio and fix the Top Cover by appropriate screws.
Ensure the two screening profiles are in position between Top
Cover and Chassis.
On the Information Label mark permanently the option Chann.
ONLY Mode!
Such a marked radio is allowed only for ground based operation!
To install the transceiver FSG 2T, carefully pull out the wire
harness of the case, connect the 15-pole receptacle and secure it
by the sliding lock. Plug antenna cable and secure it by twisting
the BNC plug. Slowly insert transceiver into the case. Put on the
matching plate and fix it by the two cross-recessed screws
8
.
Check fixing and function.