Technical data

FSG 2T PS
Portable VHF/AM Airband Transceiver
May 2010 DITTEL  D10077 33
4.9.2 Programming while in the CHANNEL MODE:
IMPORTANT!
While in the CHANNEL MODE only pre-programmed Channel
Numbers with its corresponding frequencies can be stored in
other memory locations!
Example:
Turn the F/CH knob
6
to change the underscored Channel
Number to the desired Channel Number to be stored in another
memory location.
Press the STO button 3 once to initialize storing.
Release the STO button 3 . A flashing "CH" is shown. The active
Channel Number and its frequency is now ready within 1 minute
to be stored in any of the other 19 memory channels.
Turn the F/CH knob
6
to select the desired memory location.
Press and hold the STO button 3 for at least 1 second. The flashing
"CH" should change to steady "St" and the underscore disappears
indicating that it has been stored into the new memory successfully.
Release the STO button and the radio returns to CHANNEL MODE.
The stored Channel Number is now the active Channel Number
with its corresponding frequency.