Technical data

VHF/AM RADIO FSG 2T
6 Operation
62 FAV_D10048 June 2014
6.5.2 Programming while in CHANNEL MODE:
IMPORTANT!
 While in the CHANNEL MODE only pre-programmed Channel Numbers
with its corresponding frequencies can be stored in other memory
locations!
Example:
Turn the F/CH knob to change the underscored Channel Number
to the desired Channel Number to be stored in another memory
location.
Press the STO button to initialize storing.
Release the STO button. A flashing "CH" is shown. The active
Channel Number and its frequency is now ready within 1 minute
to be stored in any of the other 19 memory channels. Turn the
F/CH knob to select the desired memory location.
Press and hold the STO button for at least 1 second. The
flashing "CH" should change to steady "St" and the underscore
disappears indicating that it has been stored into the new
memory successfully.
Release the STO button and the radio returns to CHANNEL MODE.
The stored Channel Number is now the active Channel Number
with its corresponding frequency.