Technical data

VHF/AM RADIO FSG 2T
6 Operation
58 FAV_D10048 June 2014
The underscored kHz portion of the frequency indicates
accessibility to kHz selection.
Select the appropriate kHz portion by rotating the F/CH knob. A
clockwise rotation will increment the previous frequency in
25 kHz steps (37, 40, 42 etc.) while a counter-clockwise rotation
will decrement the previous frequency in 25 kHz steps (32, 30,
27 etc.) with rollover at each MHz and band edge (121.97 →
122.00 or 121.00 → 121.97).
This is the new active frequency!
EXAMPLE:
CHANNEL MODE:
Important: The appropriate operating frequency must be stored
already in a memory channel (refer to § 6.5 Memory
Programming).
Select appropriate channel memory number together with the
associated frequency by rotating the F/CH knob. A clockwise
rotation will increment (4, 5, 6 etc.) while a counter-clockwise
rotation will decrement (2, 1, 20 etc.) the previous channel
number with rollover at each edge.
This is the new active frequency and its associated channel
memory number!
• Rotate VOL knob clockwise, about half way.
Continue with either
6.3 Receive (Listen) Operation, or
6.4 Transmit Operation
6.5 Memory Programming
6.6 VOX Intercom
6.7 Intercom (Option AF External enabled)
6.8 OPTION: AF External