Technical data

VHF/AM RADIO FSG 2T
5 Functional Description
June 2014 FAV_D10048 53
F/CH Knob
Rotary control and push button = dual function
Pressing the F/CH knob once
 while in the DIRECT TUNE MODE changes the access from kHz to MHz or
vice versa from MHz to kHz. The active access to MHz or kHz is
underscored by a cursor.
 While in the CHANNEL MODE pressing the F/CH knob is without function.
Rotating the F/CH knob
 while in the DIRECT TUNE MODE will increment or decrement the MHz or
kHz portion of the active frequency with rollover at each band edge.
 while in the CHANNEL MODE changes the channel memory number and
associated frequency. All channel numbers (1 to 20) can be used.
STO (STORE)
Push button
When pressing the STO button (within approx. one minute)
 storing of a frequency in one of the memory channels is initiated, or
 storing of a frequency is confirmed (at least 1 sec)
20 frequencies may be programmed in non-volatile memory channels. The
channel memory numbers (1 20) are user programmable.
IMPORTANT!
 Only ONE control element may be operated at a time. If more
than one element is operated simultaneously, function
change is blocked.