Technical data

VHF/AM RADIO FSG 2T
4 Recommended Set-up Sequence
48 FAV_D10048 June 2014
4.5 Check the RX Loudspeaker / Headphone Volume
IMPORTANT!
 When using two headsets the characteristics of both should be identical.
 On a busy channel listen to the radio traffic.
 Turn the VOL knob from fully counter-clockwise to fully clockwise position. The audio
volume audible in the A/C loudspeaker and/or the headphone should increase
accordingly. Set VOL knob to get a convenient audio level.
 This radio contains an audio-leveling circuit. If the audio level is adjusted once it will
keep the volume almost constant when receiving different signals with a modulation
of at least 30% AM.
4.6 Fixing the radio
IMPORTANT!
 After finishing all settings move cover to its place and fix the screws!
 This shielding is absolutely necessary because of required immunity
against high energy RF interference!
 Check for proper fixing of the DB-15 Standard connector (sliding lock).
 Check for proper fixing of the UG-88 C/U Antenna Connector (bayonet lock).
 Fix the radio on instrument panel using the four cross recessed screws M4 × 20 mm.