Spec Sheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100055-001 Rev 5 03/17
©2017 DITEK Corp.
Page 1 of 1
Technical Specifications
DTK-
SL30
SL50
SL95
SL130
Service Voltage:
30V
50V
95V
130V
MCOV:
38VDC
66VDC
127VDC
175VDC
Clamping Voltage:
47V
82V
150V
204V
Protection Modes:
Tip-Ground, Ring-Ground
Surge Current Rating:
1,000
Amps
per pair
5,000
Amps
per pair
4,000
Amps
per pair
4,000
Amps
per pair
Max Continuous
Current:
“-A” models 150mA “-B” models 2A
Mechanical Characteristics
Base Connection
Method:
Press-to-Fit connection to 66 Block
Housing:
High Impact Plastic
Operating
Temperature:
-40°F - 158°F (-40°C - 70°C)
Maximum Humidity:
95% non-condensing
Dimensions:
.3.24”L x .38”W x 1.56”H
(82.3mm x 9.6mm x 39.6mm)
Weight:
.5oz (14g)
Quality, Standards & Approval
Agency Approvals:
“-A” models UL497A “-B” models UL497B
Warranty:
Ten Year Limited Warranty
DITEK’s DTK-SL Series quick–connect line protectors are
designed specifically for Voice/Data professionals. The
Snap-Lite provides both voltage and current limiting in
addition to surge protection. The unique multi-function
diagnostic LED shows protection status, line continuity and
line usage. Available in four different voltages, there is a
Snap-Lite for virtually any analog 66 block application.
Product Features
 Quick connect module – no bridge clips
required!
 Each Snap-Lite protects one pair
 Field-replaceable modules
 Self-resetting fuse on models with “A” suffix
 Models available for both current-limited and
standard lines
Applications
 Voice/Data Professionals
Note
 Each 66 Block requires one ground bar:
DTK-SIGB