Data Sheet

DITEK’s DTK-RMAC12 is the solution to today’s plethora of rack-mounted servers, call systems,

controllers, and CCTV equipment. The 1U rack configuration provides twelve surge protected AC

outlets, with six on the front for convenience. The front-mounted on/off switch allows for emergency

shutdowns, and diagnostic LEDs indicate electrical system and surge protection status.

Rack Mount AC Surge Protector

General Product Specifications

DTK-RMAC12

Application Features

• Rack mount solution for servers computers, voice

systems, CCTV, or other rack-mounted electronic

equipment

• 12 surge protected outlets – 6 on the front of the

RMAC12, and 6 on the back

• EMI/RFI Noise Suppression

• LED indicator lights – Power On, Surge Protection

OK, Wiring Fault

• 15 foot cord for installation convenience

• Ten Year Limited Warranty

Product Features

Agency Approvals: UL 1449, 3

Edition, cUL

Protector Type: SPD Type 3, Recognized Component

Service Voltage: 110VAC - 120VAC

Operating Frequency: 57-63 Hz

Max Continuous Current (Line Power): 15 Amps

Max Surge Current: 36,000 Amps

Suppressed Voltage Rating: 400V

Protection Modes: L-N, L-G, N-G

EMI/RFI Noise Filtering: 58dB, 150kHz – 100MHz

Dimensions: 3.75”L x 19”W x 1.75”H

(95mm x 483mm x 45mm)

Weight: 5.25 lbs (2.4kg)

Warranty: 10 Year Limited Warranty

One DITEK Center

1720 Starkey Road

Largo, FL 33771

1-800-753-2345 Direct: 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Document:SPS-100020-001 Rev 3 2/14

Specifications Subject to Change