Data Sheet

DITEK’s MRJPOE protects circuits that use state-
of-the-art Power Over Ethernet connections. This
point of use surge protector can be installed either
at the equipment end or ahead of injectors or
midspan devices. The DTK-MRJPOE is ideal
surge protection for PoE DVRs, NVRs, cameras,
telephones and access control systems.
DTK-MRJPOE
Power Over Ethernet Power/Video/Data Surge Protection
Gigabit Ethernet General Product Specifications
Performance Data
DTK-MRJPOE
Product Features
• Protects power, video and data on fixed or PTZ
cameras
• RJ45 connection with external grounding screw
• Ethernet data speed without signal degradation
• Multi-stage, SAD technology, hybrid design
provides the best possible protection
• Complies with IEEE Std. 802.3af and 802.3at for PoE
• Available as a single device or 12-Port, 1U Rack
Mount (DTK-RM12POE)
• PoE Plus ready for high-wattage applications
• Ten Year Limited Warranty
Specifications
Agency Approvals: UL497B
Standards Compliance:
CAT5e, EIA/TIA568A, EIA/TIA568B
Connection Method: RJ45 In/Out
Pinout: All 8 pins are protected
Data Rate: Gigabit Ethernet
Max Continuous Current: 1.5 Amps
Dissipation: 3,000W/pair (10/1000µs impulse)
Protection Modes: Line-Ground (All)
Operating Temperature: -40°F - 158°F (-40°C - 70°C)
Maximum Humidity: 95% non-condensing
Dimensions: 1.7” x 3.0” x 1.2”
(43mm x 76mm x 30mm)
Weight: 4oz (113g)
Housing: ABS
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
DTK-MRJPOE
Service Voltage 48V
MCOV 64V
Clamp Voltage 72V
Peak Surge
Current
30A/pair
Doc. Number: SPS-100042-001 Rev 11 02/12
©2011 DITEK Corp.
Specification Subject to Change