Data Sheet

DITEK’s DP4P protects all the sensitive feeds to
critical Pan/Tilt/Zoom cameras, not just the video
cable. Simple to install, the DP4P protects 24 Volt
power conductors, 5 Volt RS-422 data pairs, and
video conductors – all in one compact package.
With the lowest video let through voltage (and best
surge protection) on the market, the DP4P provides
ideal surge protection for today’s sensitive,
sophisticated PTZ cameras. Three different DP4P
models protect coaxial, twisted pair, or Balun video
circuits. The DP4PBP includes passive Balun
conversion.
Pan/Tilt/Zoom Camera Surge Protector
General Product Specifications
DTK-DP4P Series
DTK-DP4P
DTK-DP4PBP
DTK-DP4PTPV
One DITEK Center
1720 Starkey Road
Largo, FL 33771
Document: SPS-100061-001 Rev 7 09-14
©2014 DITEK Corp.
Specification Subject to Change
1-800-753-2345 Direct: 1-727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Product Features
• Protects power, video and four data
conductors in one package
• 3 Amp, 24V circuit protects power feeds to
camera, heater, blower, defroster
• 0.2 Amp circuit protects data and video
• Multi-stage, SAD technology, hybrid design
provides the best possible protection
• Single point ground improves protection and
speeds installation
• Protect standard Coax (DP4P), Balun
(DP4P BP), or Twisted Pair (DP4PTPV)
video connections
• Ten Year Limited Warranty
Product Selector
• Coax connected PTZ camera: DTK-DP4P
• Balun connected PTZ camera: DTK-DP4PBP
• Twisted pair video PTZ camera: DTK-DP4PTPV
DTK-DP4P
DTK-DP4PBP
DTK-DP4PTPV