Spec Sheet

8-Outlet Plug-In Surge Protection
General Product Specifications
DTK-8FF
DTK-8FF
Product Features
• 8AC outlets protected, up to six transformers
• Diagnostic LED indicates ground presence
and suppressor function
• Automatic shutdown feature turns off power
in case of suppressor overload
• 1 in / 2 out RJ11 Telco protection included
• Mounting slots allow installation on wall or
backboard
• Six foot cord
• Ten year limited warranty
Specifications
Agency Approvals: UL1449, 3
rd
Edition (AC)
UL497A (Telco)
SPD Type 3
Service Voltage: 110-120VAC
MCOV: 125VAC, 130V Telco
Connection: Direct plug-in (AC); RJ11 (Telco)
Continuous Current: 15 Amps
Max Surge Current: 144,000 Amps Total (AC)
5,000 Amps (Telco)
Nominal Discharge
Current: 3,000 Amps
Joule Rating: 2,160j (AC); 160j (Telco)
Protection Modes: L-G, L-N, N-G (AC)
Tip-G, Tip-Ring, Ring-G (Telco)
U.L. Voltage
Protection Rating: 330V L-N, 400V L-G, N-G
Dimensions: 10.5” x 3.9” x 1.4”
(267mm x 99mm x 36mm)
Weight: 1.3lb (590g)
Housing: ABS
DITEK’s DTK-8FF eight outlet SPD
(Surge Protective Device) protects
AC power and telco/modem/fax
lines. Hybrid circuitry provides
excellent point of use protection.
Up to six transformers can be used
at the same time. EMI/RFI filtering
provides extra protection for
sensitive electronics.
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Document: SPS-100026-001 Rev 7 10/09
©2009 DITEK Corp.
Specification Subject to Change