Data Sheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Doc. Number: SPS-100083-002 Rev 2 10/15
©2015 DITEK Corp.
Page 1 of 1
Technical Specifications
Service Voltage:
120VAC
Surge Current Rating:
36,000 Amps
Max. Continuous Current:
15 Amps
Protection Modes:
L – N, L – G, N – G
Operation Frequency:
50/60Hz
Mechanical Characteristics
Connection Method:
Direct Plug-In
Housing:
ABS
Quality, Standards & Approval
Agency Approvals:
UL1449, cUL
SPD Type:
Type 3 SPD
Warranty:
10 Year Limited
DITEK’s DTK-7VS Power Strips are the next wave in
power distribution devices that combine DITEK’s trusted
surge protection with a modern look and feel. Your
sensitive electronics are safe with features like an
illuminated load-status indicator, and resettable
overcurrent protection.
Is your circuit overloaded? Now you know the answer.
Green = Safe; Orange = Warning; Red = Maximum,
Flashing Red = Overload.
VS Series devices are “plug & Play” with no
additional settings required, and EMI/RFI
filtering provides extra protection for sensitive
electronics.
Flashing Red = Overload
Red = Maximum
Yellow = Warning
Green = Safe
Applications
 Audio/Video, Home Office, Garage, Workshop
Product Features
 120VAC – 15A
 7 AC Outlets, 4 Ft Power Cord
 Wall-mountable
 Illuminated Load-Status Indicator – different colors for each level of load status
 2-in-1 Power ON/OFF Rocker Switch
LED Colors for Different Levels of Load Status