Data Sheet

DTK-120/240CM+
120/240VAC Surge Protective Device
General Product Specifications
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Document: SPS-100024-001 Rev 10 12/13
©2010 DITEK Corp.
Specification Subject to Change
DITEK’s 120/240CM+ is a durable, cost-effective
SPD suitable for use in a variety of locations. It is
typically used to protect pumps, motors, HVAC
condensers, and incoming utility power. Backed by a
ten year warranty, the DTK-120/240CM+ is an
excellent choice for effective, economical protection.
Also available in a 12-Up Contractor’s Bulk Pack.
Specify DTK-120/240CM+B
Service
Wiring
Peak Surge
Current
MCOV
UL 1449,
3
rd
Ed.
V.P.R.
Short
Circuit
Current
Rating
UL1449, 3
rd
Ed. I
n
Rating
DTK-
120/240CM+
Split Φ
(2W + G),
120/240VAC
72,000A/Phase
36,000A/Mode
130/260V
500V L-G,
900V L-L
10,000A 10,000A
Product Features
• Weatherproof enclosure
• Parallel connection for easy installation
• Diagnostic LED provides positive indication of
power, ground presence, and surge protection
• Automatically resets to handle multiple surge events
• Typical Applications: A/C disconnect, small
electrical panels, pool/well pumps
• Ten year limited warranty
Specifications
Agency Approvals: UL 1449, 3
rd
Edition, cUL
Protector Type: SPD Type 2
Protection Modes: L-G, L-L
Response Time: <1ns
Temperature Range: -40°F – 185°F (-40°C – 85°C)
Maximum Humidity: 95% non-condensing
Operating Frequency: 0Hz – 400Hz
Dimensions: 2.93” x 2.83” x 1.68”
(74.4mm x 71.9mm x 42.7mm)
Connection: ¾” threaded fitting
Weight: .5lb. (227g)
Housing: ABS
DTK-120/240CM+