Operation Manual

- 36 -
0DT829 15/10/2012
Trimmer Description
T1 Setting automatic closing time. From 0 to 30 s.
T2 Partial opening adjustment. From 0 to 10 s.
T3 Adjust opening speed.
T4 Adjust closing speed.
T5 Adjust deceleration in opening.
T6 
0 s 30 s
0 s 10 s
0 MAX
0 MAX
0 MAX
0 MAX
 Description OFF ON
DIP 1
Enable adjustment through
trimmer
Disabled. Enabled.
DIP 2  Disabled. Enabled.
DIP 3 Future Use Do not use. Do not use.
DIP 4 Future Use Do not use. Do not use.
J2 Brake power supply Do not cut. 24 V Brake
47E
LED Input ON
DL1 (2) Automatic closing
DL2 (3) Opening
DL3 (4) Closing
DL4 (9) Stop
DL5 (20) Partial opening
DL6 (40) Safety edge
DL7 Stop push button
DL8 (8) Closing Safety
DL9 (13) Opening limit switch
LED Input ON
DL10 (12)
Slowing down limit switch
DL11 (11)
Closing limit switch
DL12
Flashing lamp
DL13
Run OK
DL14
Fault
DL15
Autotest
DL16
Brake
DL17
Cycles counter
SIGNALS AND SETTING
Button LED
Starts the opening operation. The green LED on indicates the presence of the 24 V=power supply.
Starts the partial opening operation.
Starts and stops the STOP operation.
the red LED on indicates that the STOP has been activated.
the ashing red LED indicates that the safety devices have been activated.
Starts the closing operation.
ON