Operation Manual
- 29 -
0DT829 15/10/2012
0 1
Tx1 Rx1
0 1
0 1
Tx2 Rx2
0 1
A935G/E
A935L
7982
7982
A451L
A934E/L
A933A - 7823B
A931C - 7824B
7825A - C
7823A
7824A
7824A
7825A
A935E/F
7823C/D
7824C/D
7824C/D
Black
Blue
Black
Blue
Orange
Red
Black
Blue
Orange
Red
Black
Blue
C T
19
1817
4. ELECTRIC CONNECTIONS
4.1 Control panel
• Insert the cables with pre-wired terminal boards in the housing, and connect them to the cards Fit the cables in
the conduit and connect the connectors on the motor
4.2 Connecting the control panel / motor / security
• Figure 19 shows the layout of the cables supplied, and their position in the door; each cable is identied by a special code
on an adhesive label.
4.3 Safety photocells
• Wire the device as per the diagram
• Make the connections in the control panel, as shown in the diagrams
EN