Instruction Manual

11
IP2361
EN
4. Axel installation
4.1 Installation
- Fit the DOD12-14-15 motor onto the drive shaft.
- After having determined the position of the wall bracket, drill the holes and secure the bracket in place with dowels (not supplied).
- Insert the appropriate cotter
3
according to shaft cavity length.
- Secure the metal clamp
4
so as to prevent the risk of the cotter coming out of the shaft.
ATTENTION! firmly tighten down all fastening screws.
3
6.35 (1/4")
6.35
(1/4")
9.5
(3/8")
4
1
min 140mm
2
NRG100TXE
NRG100TRE
NRG100TXF
NRG140TXE
EL400
EL500E
NRGCAB