Installation Instructions

IP2246EN

The procedure to switch on the display is as follows:

• press the ENTER key

• the display functioning check starts

• the ﬁrst level menu is displayed

The procedure to switch off the display is as follows:

• press the ESC key

NB: the display switches off automatically after 60 s of inactivity.

• The simultaneous pressing of the ↑ and ENTER keys produces an opening command.

• The simultaneous pressing of the ↓and ENTER keys produces a closing command.

• The simultaneous pressing of the ↑ and ↓ keys produces a POWER RESET com-

mand (power supply interruption and automation restart).

• Keep the UP ↑ or DOWN ↓ key pressed to begin fast menu scrolling.

• In some menus, the parameter measurement unit can be viewed by pressing the

ENTER key once the value has been displayed.

Example: setting of 10 seconds for parameter OB.

5. Programming

5.1 Switching the display ON and OFF

NB: pressure on the keys may be quick (less than 2 s) or prolonged (longer than 2 s).

Unless speciﬁed otherwise, quick pressure is intended.

To conﬁrm the setting of a parameter, prolonged pressing is necessary.

5.2 Navigation keys