Installation Instructions

42
IP2246EN
13.3 Visualisation of alarms and faults
i
WARNING: the visualisation of alarms and faults is possible with any visualisation selection.
The signalling of alarm messages takes priority over all other displays.
Type of
alarm
Display Description Operation
Mechanical alarm
M0 - Automation type not selected
Select a type of automation from the
menu
M4 - Short circuit - motor 1 Check the connection of motor 1.
M5 - Short circuit - motor 2 Check the connection of motor 1.
MB - Absence of motor 1 during an oper-
ation
Check the connection of motor 1.
MC - Absence of motor 2 during an oper-
ation (if 2-motor functioning has been set)
Check the connection of motor 2.
MD - Irregular functioning of motor 1
opening limit switch
Check the connection of the motor 1 open-
ing limit switch.
ME - Irregular functioning of motor 1 clos-
ing limit switch
Check the connection of the motor 1 clos-
ing limit switch.
MF - Irregular functioning of motor 2
opening limit switch
Check the connection of the motor 2 open-
ing limit switch.
MG - Irregular functioning of motor 2 clos-
ing limit switch
Check the connection of the motor 2 clos-
ing limit switch.
MH - Door wing overlap not correct Check that the motor which is the first to
make the opening (M1) is connected as
shown in fig. 1.
MI - Detection of third consecutive obstacle Check for the presence of permanent ob-
stacles along the stroke of the automation.
OD - Obstacle during opening - gate wing 1 Check for the presence of obstacles along
the automation stroke.
OE - Obstacle during closure - gate wing 1 Check for the presence of obstacles along
the automation stroke.
OF - Obstacle during opening - gate wing 2 Check for the presence of obstacles along
the automation stroke.
OG - Obstacle during closure - gate wing 2 Check for the presence of obstacles along
the automation stroke.
Settings
alarm
S6 - Incorrect setting of safety device test Check the configuration of parameters
, , .
If
, and cannot be
or
.
Service
alarm
V0 - Request for maintenance intervention Proceed with the scheduled maintenance
intervention.