Installation Instructions

40
IP2246EN
13. Signals visualised on the display
i
NB: depending on the type of automation and control panel, certain visualisations may not
be available.
13.1 Display of automation status
i
NB: the automation status display mode is only visible with Display visualisation mode set
to 02.
Display Description Display Description
Automation closed Automation opening
Automation open Automation closing, from partial opening
Automation stopped in intermediate
position
Automation in partial opening
Automation closing Automation partially open
13.2 Display of safety devices and commands
i
NB: the safety device and command visualisation mode is only visible with Display
visualisation mode set at 01 or 03.
Display Description Display Description
1-2 - Automatic closing activation com-
mand
1-6 - Safety device with opening and
closing stop
1-3 - Opening command 1-8 - Safety with closing reversal
1-4 - Closing command 1-9 - STOP command
1-5 - Step-by-step command 68 - Partial opening command