Installation manual

GB
10
CUBIC6 - IP1812
2. REFERENCE TO ILLUSTRATIONS
The given operating and performance features can only be guar-
anteed with the use of DITEC accessories and safety devices.
2.1 Standard installation references(g.1)
[1] Radio
[2] Flashing light
[3] Key selector
[4] Connect power supply to an type-approved omnipole
switch with a contact opening gap of no less that 3 mm
(not supplied)
[5] Control panel
[6] Geared motor
[7] Photocells
2.2 Accessories
CUBIC6C Foundation casing
CUBIC6CG Oversize foundation casing
CUBIC6CY Stainless steel foundation casing
CUBIC6CTI Gears foundation casing
CUBIC6L Lever mechanism kit
CUBIC6LG Oversize lever mechanism kit
CUBIC6TC Chain-operated lever mechanism kit
CUBIC6TI Gear-operated lever mechanism kit
CUBIC6TIG Oversize gear-operated lever mechanism kit
CUBIC6SBL Lever-operated release kit
CUBIC6SBD Key-operated release kit
CUBIC6FM Magnetic limit switch kit
3. INSTALLATION
Unless otherwise specied, all measurements are expressed
in millimetres (mm).
3.1 Preliminary checks
Check that the structure is sufciently sturdy and that the hinge
pivots are properly lubricated. Provide an opening and closing
stop.
Note: if the gate wing is more than 2.5 m wide, an electric lock
should be installed.
3.2 Foundation case installation
Install the foundation case as indicated in the relevant manual.
3.3 Lever mechanisms installation
Choose and install the lever mechanisms as indicated in the
relevant manual.
3.4 Wingreleaseinstallation
Choose and install the door release mechanisms as indicated
in the relevant manual.
Attention: to install the releases more easily, we advise you to
position the gate at the centre of the foundation casing and re-
move the lid, in such a way as to have enough space for xing
the screws.
1. TECHNICAL DATA
CUBIC6 CUBIC6J CUBIC6H CUBIC6V CUBIC6HV
Power supply 230 V~ / 50 Hz 120 V~ / 60 Hz 24 V= 230 V~ / 50 Hz 24 V=
Absorption 1,5 A 4 A 12 A 1,5 A 12 A
Torque 340 Nm 340 Nm 340 Nm 220 Nm 220 Nm
Condenser 10 µF 40 µF - 10 µF -
Openingtime 18 s / 90° 18 s / 90° 12÷25 s / 90° 9 s / 90° 6÷13 s / 90°
Service class 3 - FREQUENT 3 - FREQUENT 4 - INTENSIVE 3 - FREQUENT 4 - INTENSIVE
Intermittence
S2 = 15min
S3 = 25%
S2 = 15min
S3 = 25%
S2 = 30min
S3 = 50%
S2 = 15min
S3 = 25%
S2 = 30min
S3 = 50%
Temperature -20° C / +55° C -20° C / +55° C -20° C / +55° C -20° C / +55° C -20° C / +55° C
Degreeofprotection IP67 IP67 IP67 IP67 IP67
Control panel E2 E2 J VIVAH E2 VIVAH
Applications
m = leaf width
kg = leaf weight
600 kg
500 kg
400 kg
300 kg
200 kg
100 kg
m1 2 3 4 5
600 kg
700 kg
800 kg
500 kg
400 kg
300 kg
200 kg
100 kg
m12345
600 kg
500 kg
400 kg
300 kg
200 kg
100 kg
m12345
CUBIC6L*
CUBIC6LG**
CUBIC6TI*
CUBIC6TIG**
CUBIC6TC
[CUBIC6C-CUBIC6CTI*] [CUBIC6CG**]