Instruction Manual

9
IP2042EN  2012-07-24
1.22 Attach the supplied hooN to the lower part of the wing
as shown in the diagram in order to prevent seal 87 from
sliding.
1.2 Attach pro¿le 81 to the PAM4M pro¿le 808 or else to
the PAM4/ pro¿le 821 as shown in the diagram.
1.24 Insert seal 88 into pro¿le 81 as shown in the dia-
gram and blocN it to prevent it from sliding.
1.2 Close the visible holes with the supplied caps as shown
in the diagram.
1.2 :ith PAM4M pro¿les insert the glass [] into the mobile
wing as shown in the diagram.
A
A
1.27 Set the glass spacers [A] shown in the diagram so that
the\ provide proper support.
NB: when instaOOing the ¿tting, adMust the Sush gOass sSacers
>@ as shown in the Sicture , for the moEiOe door wing to reach
the hori]ontaO Sosition.
1.28 :ith PAM4M pro¿les insert the seals into the glass-blo-
cNing pro¿les [8] as shown in the diagram.
1.2 :ith PAM4M pro¿les insert the glass-blocNing pro¿les
[8] onto the mobile wing until the\ clicN as shown in the dia-
gram.