Instruction Manual

33
IP2042EN  2012-07-24
The label supplied must be attached in a visible position on
each mobile door that can be breaN out [a] in the direction of
the escape.
Installer:
TEAR OFF AND DELIVER TO USER
OPERATING INSTRUCTION FOR BREAK OUT SLIDING DOORS
abab
a
b
b
a
Le ante non devono essere
completamente chiuse.
Wings must not be completely
closed.
a
b
b
a
The breaN out of mobile doors [a] and semi-¿[ed doors [b] if
present is obtained b\ pushing the doors in the direction of the
escape. A force of no more than 220 N near the closing edge at
a height of appro[imatel\ 1 m from ground level is suf¿cient.
%\ breaN out the doors the motorised function is interrupted and
the door can onl\ be moved manuall\.
To restore automatic function of the sliding door partiall\ open
the breaN-out mobile doors and manuall\ reposition each door.
Start with the mobile doors [a] and then the semi-¿[ed doors
[b] bringing them bacN to their initial position.
:arning: 'oors must not Ee comSOeteO\ cOosed
DITEC S.p.A.
Via Mons. %an¿ 
21042 Caronno Pertusella (VA) - ITA/<
Tel.  02 11 - )a[  02 014
www.ditec.it - [e-mail]
TM