Instruction Manual
20
IP2042EN 2012-07-24
4.1 Insert the seal 8 into the PAM4M pro¿les 800 808
and 81 or else the PAM4/ pro¿les 821 and 822 as
shown in the diagram.
4.2 Shorten the seal to the si]e of the pro¿le.
4. Insert detail [1] into the PAM4M pro¿les 800 and 81
or else the PAM4/ pro¿les and 822 and fasten it as
shown in the diagram.
4.4 -oin the vertical pro¿les with the hori]ontal pro¿les and fa-
sten them as shown in the diagram.
Note: :ith 3$0/ Sro¿Oes, the gOass >@ must Ee inserted
when Moining the YerticaO and hori]ontaO Sro¿Oes
7he gOass suSSort sSacers must Ee SroSerO\ aSSOied to the four
sides and must Ee adMusted as shown in SaragraSh
4. )asten pro¿le 80 to the lower portion of the wing as
shown in the diagram.
4. Insert the brushes SPAZ14 as shown in the diagram and
blocN them to prevent them from sliding.