Instruction Manual

14
IP2042EN  2012-07-24
2.1 )asten pro¿le 24 to the upper portion of the wing and
perform the proper connections as shown in the diagram ma-
Ning reference to page 1.
2.17 )asten detail [1] to pro¿le 24 as shown in the diagram.
Note: Be sure to take note of the wing¶s oSening direction
2.18 )asten pro¿le 24 to the hinge side vertical upright as
shown in the diagram.
2.1 )asten detail [17] as shown in the diagram.
2.20 )asten the e[panders [18] to the perimeter pro¿les 80
as shown in the diagram using the appropriate  mm Allen
Ne\.
Note: 'uring the instaOOation of the ¿[ture, the Serimeter Sro
¿Oes  must Ee attached to the waOO and OeYeOed with the
e[Sanders
2.21 )asten detail [1] to pro¿le 80 as shown in the dia-
gram.
Note: 'uring the instaOOation of the ¿[ture, the caEOes coming
out of the ¿[ed wing must Ee fed through detaiO >@
2.22 )asten detail [20] to the lower portion of pro¿le 80 as
shown in the diagram.
2.2 )asten detail [21] to the upper portion of pro¿le 80 as
shown in the diagram.