Instruction Manual
12
IP2042EN 2012-07-24
2.1 Insert the seal 8 into the PAM4M pro¿les 800 808
and 81 or else the PAM4/ pro¿les 821 and 822 as
shown in the diagram.
2.2 Shorten the seal to the si]e of the pro¿le.
2. -oin the vertical pro¿les with the hori]ontal pro¿les and fa-
sten them as shown in the diagram.
Note: :ith 3$0/ Sro¿Oes, ,nsert detaiO >@ into Sro¿Oes
and , as shown in the diagram
Note: :ith 3$0/ Sro¿Oes, the gOass >@ must Ee inserted
when Moining the YerticaO and hori]ontaO Sro¿Oes
7he gOass suSSort sSacers must Ee SroSerO\ aSSOied to the four
sides and must Ee adMusted as shown in SaragraSh
2.4 Insert detail [11] into the lower portion of the wing and fa-
sten it as shown in the diagram.
2. Insert the brushes SPAZ14 upon pro¿le 80 and blocN
them to prevent them from sliding. )asten pro¿le 80 to the
lower portion of the wing as shown in the diagram.
2. Insert detail [12] into the lower portion of the wing and fa-
sten it as shown in the diagram.
2.7 Insert the photocell [2] which detects the opening of the
mobile wing into pro¿le 81 as shown in the diagram.
NB: the ShotoceOOs >@ that detect the Sresence of SeoSOe and
oEMects in the Sassage chamEer can Ee inserted as shown in
Sicture