Owner's manual

Specifications - 98 R150/R230/R300 Operator’s Manual
Power Unit with Independent Auger Trencher
CMW
Specifications are called out according to SAE recommended procedures. Specifications are general and
subject to change without notice. If exact measurements are required, equipment should be weighed and
measured. Due to selected options, delivered equipment may not necessarily match that described.
Operation U.S. Metric
Digging chain speed
Minimum 230 ft/min 70.1 m/min
Maximum 364 ft/min 111 m/min
Trench cleaner (optional) type: mechanical
Minimum 4 in 102 mm
Maximum 8 in 203 mm
Spoils handling: single open end auger
Auger size: 6.18” OD x 2” ID x 17.25” long
Tires
Trail wheel: urethane filled 16 X 6.5-8, 2 ply, bar lug
Tire assembly mass 18 lb 8.16 kg