Owner's manual

Service - 70 R150/R230/R300 Operator’s Manual
20 Hour
CMW
Change Engine Oil and Filter (Initial) -
R230/R300
Change engine oil and filter after the first 20
hours of operation.
1. Move drain hose (1) to front of unit and drain
while oil is still warm.
2. Replace plug.
3. Install new filter (3).
4. Add 2 qt (1.9 L) of GEO at fill neck (2).
Trencher
Lube Trail Wheel
Lube trail wheel with MPG every 20 hours.
IMPORTANT: If operating in extremely dusty
conditions, change oil more frequently. Use oil
specified in temperature chart found in
“Recommended Lubricants/Service Key” on
page 62.