Owner's manual

Specifications - 74 SK750/SK755 Operator’s Manual

SK755 Power Specifications

CMW

SK755 Power Specifications

Specifications are called out according to SAE recommended practices. Specifications are general and subject to change without

notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered

equipment may not necessarily match that shown.

Power U.S. Metric

Engine: Kubota D1105-T, diesel, EPA Tier 4, EU Stage IIIa

Number of cylinders 3

Displacement

68.5 in

1.12 L

Bore 3.07 in 78 mm

Stroke 3.09 in 78.4 mm

Manufacturer’s gross power rating (per SAE J1955) 32.8 hp 24.5 kW

Estimated net power rating (per SAE 1348) 31.5 hp 23.5 kW

Rated engine speed 3000 rpm 3000 rpm

Maximum tilt angle, fore and aft 30° 30°

Maximum tilt angle, side to side 30° 30°

* Exceeding these operating angles will cause engine damage. This DOES NOT imply that the machine is stable to maximum

angle of safe engine operation.

Hydraulic System U.S. Metric

Auxiliary: double gear pump

Flow rate (pump 1) 8.0 gpm 30 L/min

Flow rate (pump 2) 5.5 gpm 21 L/min

Pressure 3000 psi 207 bar

Ground drive: dual hydrostat

Flow rate 13.9 gpm 52 L/min

Pressure 3500 psi 241 bar

Noise Levels

Operator 87 dBA sound pressure per ISO 6394 Exterior 101 dBA sound power per ISO 6393

Vibration Level

Vibration at the operator’s hand during normal operation is 4.31 m/sec

Vibration at the operator’s foot during normal operation is 1.07 m/sec