User Manual

Specifications - 64 P80/PP25 Operator’s Manual

PP25

CMW

Specifications are called out according to SAE recommended practices where indicated. Specifications are

general and subject to change without notice. If exact measurements are required, equipment should be

weighed and measured. Due to selected options, delivered equipment may not necessarily match that

shown.

Power U.S. Metric

Engine: Honda GX690, EPA Phase III

Fuel: gasoline

Cooling medium: air

Cylinders: 2

Displacement

42 in

688 cm

Bore 3.03 in 77 mm

Stroke 2.83 in 72 mm

Power

manufacturer’s gross power rating (per SAE J1995) 22.2 hp 16.6 kW

rated speed 3600 rpm 3600 rpm

Hydraulic System U.S. Metric

Pump

Flow capacity @ 3200 rpm 11.7 gpm 44.3 L/min

Maximum pressure 2500 psi 172 bar

Filtration (nominal) 10 micron 10 micron

Fluid Capacities U.S. Metric

Fuel tank 9.5 gal 36 L

Hydraulic reservoir 20 gal 76 L

Engine oil, including filter 2.1 qt 1.9 L

Battery

12V, negative ground, SAE cold crank rating @ 0°F (-18°C), 525 amps.

SAE reserve capacity rating, 85 min

Noise Levels

Exterior sound power per ISO 6394 is < or = to 108 dBA per ISO 6394.