Owner manual

JT60/JT60 All Terrain Operator’s Manual Controls - 49

Override Box

1. Tracker control key

2. Drilling fluid flow override switch

3. Rotation or right track override switch

4. Thrust/pullback or left track override switch

5. Drill override port

6. Drive override port

Item Description Notes

1. Tracker control key To allow tracker operator to

stop thrust and rotation, move

key to enable position (up).

To override tracker control

mode, move key to disable

position (right).

IMPORTANT: Remove key and keep

in tracker operator’s possession.

See “Tracker Control” on page 133.

2. Drilling fluid flow

override switch

To turn fluid on, move right.

To turn fluid off, move left.

Connect to drill connector (B) to

control fluid flow.

j40om073w.eps