Owner manual

Controls - 40 JT60/JT60 All Terrain Operator’s Manual
Right Control Console
2. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
3. Drill/Park/Drive switch To drill, press left.
To set parking brake, move to
center.
To drive, press right.
IMPORTANT:
• Lighted icon on engine display
indicates unit is ready to perform
that function.
• Cab must be in the correct
position for drill or drive.
4. Cab pivot control
switch
To pivot into drilling position,
lift pivot lock and press left.
To pivot into driving position,
press right.
5. Fluid flow control To increase flow, turn
clockwise.
To decrease flow, turn
counterclockwise.
6. Cab pivot lock To unlock, lift and hold while
pivoting cab into drilling
position.
Control will lock when cab
reaches driving position.
Item Description Notes
c00ic060w.eps
c00ic061w.eps