Manual

JT5 Operator’s Manual Service - 133
Startup/10 Hour
CMW
To replace air filter:
1. Open filter canister.
2. Remove and discard primary filter (3) and
safety elements (2).
3. Install new safety (2) and primary (3)
elements.
4. Close canister.
5. Reset air filter indicator (1).
Check Engine Oil Level
While engine oil is warm, move carriage to front of
drill frame and check oil level at dipstick (1) before
startup and every 10 hours of operation. Add DEO
at fill tube (2) as necessary to keep oil level at
highest line on dipstick.