User Manual

Controls - 28 JT20 Operator’s Manual
Set-Up Console
CMW
®
7. Right stabilizer control To raise, pull up.
To lower, push down.
Lower left and right stabilizers to the
ground to stabilize unit and then
adjust for side-to-side stability. After
unit is level, adjust for entry angle.
8. Frame tilt control To raise front end of drill
frame, pull up.
To lower front end of drill
frame, push down.
9. Left stabilizer control To raise, pull up.
To lower, push down.
Lower left and right stabilizers to the
ground to stabilize unit and then
adjust for side-to-side stability. After
unit is level, adjust for entry angle.
Item Description Notes