Owner's manual

Controls - 24 JT1220 Mach 1 Operator’s Manual
Set-Up Console
CMW
6. Right stabilizer control To raise, pull up.
To lower, push down.
IMPORTANT: Lower left and right
stabilizers to the ground to stabilize
unit and then adjust for side-to-side
stability. After unit is level, adjust for
entry angle.
NOTICE: Stand clear of right stabilizer
to avoid crushing your foot.
7. Frame tilt control To raise front end of drill
frame, pull up.
To lower front end of drill
frame, push down.
8. Left stabilizer control To raise, pull up.
To lower, push down.
IMPORTANT: Lower left and right
stabilizers to the ground to stabilize
unit and then adjust for side-to-side
stability. After unit is level, adjust for
entry angle.
NOTICE: Stand clear of right stabilizer
to avoid crushing your foot.
Item Description Notes