Owner's manual

JT1220 Mach 1 Operator’s Manual Specifications - 193

CMW

Specifications are called out according to SAE recommended practices where indicated. Specifications are

general and subject to change without notice. If exact measurements are required, equipment should be

weighed and measured. Due to selected options, delivered equipment may not necessarily match that

shown.

Drilling Fluid System (Onboard) U.S. Metric

Maximum drilling fluid flow (per SAE J2022) 15 gpm 57 L/min

Maximum drilling fluid pressure (per SAE J2022) 1250 psi 86 bar

Fluid Capacities U.S. Metric

Fuel tank * 19 gal 72 L

Hydraulic reservoir 19 gal 72 L

Engine oil, including filter 8.5 qt 8 L

Engine cooling system 3.3 gal 12 L

* Under normal operating conditions, a full tank of fuel will last 10 hours.

Battery

SAE reserve capacity rating 195 min, 12V, negative ground, SAE cold crank rating @ 0°F (-18°C), 950

amps.

Noise Levels

Operator ear sound pressure level is 82 dBA sound pressure per ISO 6394

Exterior sound power level is 99 dBA per ISO 6393

Vibration Levels

Average vibration transmitted to the operator’s hand and whole body during normal operation does not

exceed 2.5 and 0.5 m/sec

respectively. Operator seat complies with ISO 7096.