Owner manual
FX50 Operator’s Manual Controls - 23
Power Pack
CMW
Item Description Notes
1. Hydraulic function
switch
To direct hydraulic power to
the optional boom function,
press top.
To direct hydraulic power to
the door function, move to
center position.
To direct hydraulic power to
the tank tilt function, press
bottom.
2. Auxiliary outlet switch To turn on, press top.
To turn off, press bottom.
IMPORTANT: Keep switch in off
position unless in use.
3. Throttle To increase engine speed,
push up.
To decrease engine speed,
pull down.
4. Water pressure switch To turn on water pump, press
top.
To turn off water pump, move
to center position.
To bypass low water
indication, press bottom.
Water pump will operate for
60 seconds.
Use bypass to feed antifreeze into
system when freshwater tank is
empty. See “Add Antifreeze” on
page 70.
c00ic061t.eps