Owner manual

Specifications - 126 FX50 Operator’s Manual
1200
CMW
Specifications are called out according to SAE recommended practices. Specifications are general and
subject to change without notice. If exact measurements are required, equipment should be weighed and
measured. Due to selected options, delivered equipment may not match that shown.
T26S Trailer U.S. Metric
Dimensions
Clearance (at jack foot pad) 12 in 305 mm
Adj. coupler height 18-27 in 457-686 mm
Width between fenders 50 in 1.3 m
Width outside fenders 100.5 in 2.6 m
General
Number of axles 2
Coupler (square mount drawbar) 3 in or 2.5 in 76 mm or 64
mm
Type of brakes electric
Lug nut torque 190-210 ft•lb 258-285 N•m
Hitch bolt torque 300 ft•lb 407 N•m
Electrical system 12V DC
Tire
ST235/85R16, F 95 psi 6.5 bar
Load rating
Tongue weight (empty) 2450 lb 1111 kg
Tongue weight (full water) 3100 lb 1406 kg
GVWR (gross vehicle weight rating) 26,000 lb 11 793 kg
GAWR (gross axle weight rating, each) 12,000 lb 5443 kg
Load ratings for speeds up to 65 mph (104 km/h).