Manual

410sx Operator’s Manual Operation Overview - 35
Drilling
CMW
Drilling
1. Start unit. See page 44.
2. Dig approach trench and target trench. See page 67.
3. Assemble drill string and position tractor. See page 67.
4. Begin drilling. See page 69.
5. Use drill string guide as needed. See page 70.
6. Add rod. See page 71.
7. Backream. See page 71.
8. Shut down tractor. See page 45.
9. Disassemble joints. See page 72.
Leaving Jobsite
1. Restore jobsite. See page 80.
2. Rinse equipment. See page 80.
3. Stow tools. See page 80.
4. Haul equipment away from jobsite. See page 50.