Owner manual

42 100sx - SPECIFICATIONS
BELT TENSION
42 100sx - SPECIFICATIONS
BELT TENSION
OPERATION U.S. METRIC
Maximimum crowd speed forward 92 fpm 28 m/min
Maximum crowd speed reverse 92 fpm 28 m/min
Vehicle clearance circle 70 in 178 cm
Plow blade sizes
Pull blades (cover depth x mole diameter) 6-12 x .75 in 152-305 x
19 mm
Feed blades (tube diameter x cover depth (bend
radius)
.375 x 6-12
(1) in
9 x 152-305
(25) mm
Operating weight 720 lb 327 kg
Operator orientation: facing front of vehicle
Vibration
47.9 ft/s
2
14.6 m/s
2
ENGINE
Honda GX340 gasoline engine
Cooling medium: air
Number of cylinders: one
Displacement
20.6 in
3
337 cm
3
Bore 3.22 in 82 mm
Stroke 2.52 in 64 mm
Engine manufacturer’s gross power rating @ 3600
rpm
11 hp 8.2 kW
*Maximum governed speed as installed (no load) 3400 rpm 3400 rpm
Flywheel power @ 3400 rpm (full load) 10.2 hp 7.5 kW
Fuel consumption @ 3600 rpm 0.89 gph 3.4 L/h
**Maximum tilt angle 20° 20°
*All warranty is void if engine is run above maximum governed speed as
installed (no load)
**Exceeding these operating angles will cause engine damage. This DOES
NOT imply machine is stable to maximum angle of safe engine operation.
OPERATION U.S. METRIC
Maximimum crowd speed forward 92 fpm 28 m/min
Maximum crowd speed reverse 92 fpm 28 m/min
Vehicle clearance circle 70 in 178 cm
Plow blade sizes
Pull blades (cover depth x mole diameter) 6-12 x .75 in 152-305 x
19 mm
Feed blades (tube diameter x cover depth (bend
radius)
.375 x 6-12
(1) in
9 x 152-305
(25) mm
Operating weight 720 lb 327 kg
Operator orientation: facing front of vehicle
Vibration
47.9 ft/s
2
14.6 m/s
2
ENGINE
Honda GX340 gasoline engine
Cooling medium: air
Number of cylinders: one
Displacement
20.6 in
3
337 cm
3
Bore 3.22 in 82 mm
Stroke 2.52 in 64 mm
Engine manufacturer’s gross power rating @ 3600
rpm
11 hp 8.2 kW
*Maximum governed speed as installed (no load) 3400 rpm 3400 rpm
Flywheel power @ 3400 rpm (full load) 10.2 hp 7.5 kW
Fuel consumption @ 3600 rpm 0.89 gph 3.4 L/h
**Maximum tilt angle 20° 20°
*All warranty is void if engine is run above maximum governed speed as
installed (no load)
**Exceeding these operating angles will cause engine damage. This DOES
NOT imply machine is stable to maximum angle of safe engine operation.