User's Manual

AlarmDock Prem UI V1.9
Time Setting (only available when speaker is on Standby)
Display sequence for setting the time
Buttons Used:
Set Button Press
Set Button - Rotary Function
Use rotary button to scroll
between 12h and 24h
(Track skip buttons can
also be used instead of rotary button)
No Activity for 5s
Hour digits will begin to flash instantly
Minute digits will begin to flash instantly
Turn rotary button to change minutes
Turn rotary button to change hour digit
(if 12h was set - digits will cycle from 01-12 with AM
then 01-12 with PM showing)
(if 24h was set - digits will cycle from 00-23)
Mo will begin to flash
Use the rotary button
to scroll through the days
Returns to Mode Display with new time/day
No Activity for 5s
Returns to previous mode
Exits Sequence
Set Button pressed (Short/Long press)
Set Button or ‘Alram’ pressed (Short/Long press)
Set Button or ‘Alram’ pressed (Short/Long press)
Set Button or ‘Alram’ pressed (Short/Long press)
Set Button or ‘Alarm’ pressed (Short/Long press)
Track skip buttons can
also be used instead of rotary button)
track skip buttons can
also be used instead of rotary button)
track skip buttons can
also be used instead of rotary button)
12h will begin to flash instantly
0.5s 0.5s off
Page 8 of 24