Installation Guide

9/10/2019 Installation Guide – Disruptive Technologies
https://support.disruptive-technologies.com/hc/en-us/articles/360003190014-Installation-Guide 10/22
Also, note that the thin double-sided tape on the back of the sensor will attach the sensor close to the mounting surface with a
relatively low thermal resistance. This means that for installations on surfaces with high thermal capacity (e.g. a concrete wall),
temperature measurements will not be representative of the air temperature. For mounting options with increased thermal
resistance, please visit
Mounting DT Wireless Sensors.
Touch button
Button placement
Place the sensor so it is easily accessible at a sensible height, depending on use.
Press button
for assistance
Avoid Clutter
Avoid placing the sensors where it can be covered by books, paper or other objects.
API