User Manual

PAGE 8
Power On
Connect power cable to power. Then, press “I” on power switch (see figure below.) After a few seconds, the unit LEDs light up
and its IP address becomes active.
NOTE: We strongly recommend using a surge protector, or a power strip with internal circuit breaker to prevent damages to the
product.
Unit Connection Options
To connect to the unit, first download Viplex Express software and/or the ViPlex Handy mobile app (see table below). Refer to PC
download instructions on page 10 or mobile phone instructions on page 13.
CONNECT VIA PC
CONNECT VIA PHONE
IP Address, Ethernet, or USB ViPlex Handy mobile app
Create, edit, and publish playlists Display playlists only
OPERATION