User's Manual

6 / 26
Contact Displays2Go if you have questions about the operation, debugging and connection of the unit, if the unit doesn’t work
normally, please cut off the power immediately and consult the dealer. The unit is class-A product, which may cause radio
interference in living environment. In this case, please take feasible measures, and use power plug as the disconnection device.
Interfaces
1. USB interface, 2. RJ45 interface(Ethernet), 3.HDMI input, 4.Power port, 5. On/Off button,
Note: Please pull out the power plug before installing or disassembling the unit!
Steps for Assembly
1. Open the top cover as shown in Fig. 2,
2. Take out the base from the package as shown in Fig. 3,
3. Carefully lift out the unit as shown in Fig. 4 and place it on the shipping box (avoid scratching) (Fig. 5),
4. Assemble the base and the unit with dedicated screws using hex socket wrench as shown in Fig. 6.
Fig. 1 Fig. 2
Fig. 3 Fig. 4