User's Manual

9
/
27
3. For vertical installation:
a. Remove these two brackets with a 6mm hex wrench, as shown in Figure 12.
(Fig. 11) (Fig. 12)
b. Rotate these two brackets and re-lock it on the device, as shown in Figure 13.
(Fig. 13) (Fig. 14)
c. Two people are required to lift the device and hang it on the bracket. Move the machine carefully and
make sure the device has been hung before letting go (Fig. 15).
d. Re-lock the two screws just removed from the bracket in step 1a. (Fig. 16) to prevent the machine from
shaking,
(Fig. 15) (Fig. 16)