User's Manual

7
/
27
TO MOUNT WALL BRACKET
1. Remove the bracket and fix it on the wall:
a. Remove the two screws, as shown in Figure 1.
b. Remove the bracket, as shown in Figure 2.
(Fig. 1) (Fig. 2)
c. Pay attention to front and back sides while installing brackets:

(Fig. 3) (Fig. 4)
(Bracket should lay flush to wall, with raised portion facing out)
c. Fix the bracket on a load-bearing wall. Then, drill 4 holes at the desired position with a 14mm drill bit,
as shown in Figure 5.
d. Fix the bracket on the wall with M10 expansion bolts, as shown in Figure 6.
(Fig. 5) (Fig. 6)