User's Manual
Table Of Contents
- Safety Warnings and Precautions
- Assembly and Connection
- Packing List
- Interfaces
- Remote Control
- Description of Basic Operation
- Power on/Standby
- About Launch Desktop
- Description of Wallpaper Switch
- File Manager
- Local Settings
- Technical Specifications
- Cleaning and Maintenance
- Names and Contents of Toxic and Hazardous Substan
- or Elements in the Product
8
/
26
5. Fix the wall-hanging bracket on a load-bearing wall, and determine where unit should be hung. Then, drill 4
holes at the identified position with a 10mm drill bit, as shown in Figure 6;
Note: When the wall hanging support is locked, the raised edge should face outward.
(Fig. 6)
6. Fix the wall hanging bracket on the wall with M8 expansion screw, as shown in Figure 7;
7. Two people lift the machine, hang the machine on the wall hanging bracket, carefully move the machine,
and confirm that all the screws on the machine have been hung on the wall hanging bracket (Fig.8);
(Fig. 7) (Fig.8)
8. After the machine is installed, gently shake the machine to confirm whether the machine has been fixed
(Fig.9);
(Fig. 9)
Correct installation:
(convex face outward):
Incorrect installation:
(convex face to wall):