Installation guide

5
Windows XP (32-bit)
1. Insert the driver CD. Click Start, then Run.
Type D:\setup.exe, click OK. (Change D:
to match your CD/DVD-ROM drive letter).
2. Select I accept.
3. Click Yes to restart Windows. Skip this step
is not prompted.
4. Connect your second monitor to the Adapter
using an HDMI cable (not included) and
turn it on.
5. Plug the Adapter into the computer and the
driver will install automatically.
6. Click Yes to restart Windows.
To Verify Windows Installation
1. Right click Computer or My Computer,
then click Manage.
For Windows 8 / 7 / XP / Server 2008 R2: Click
Device Manager.
For Windows Vista: Click Continue, then
Device Manager.
For Windows Server 2008: Click Diagnostics,
then click Device Manager.