Installation guide

4
4. Select I Accept.
5. Connect your second monitor to the Adapter
using an HDMI cable (not included) and
turn it on.
6. Wait for the installation screens to end,
then plug the Adapter into the computer.
7. Restart your computer.
Windows Vista (32-/64-bit) / Server 2008
(32-/64-bit)
1. Insert the driver CD. Close AutoPlay box.
2. Click Start, in the Start Search box, type
D:\setup.exe, press Enter. (Change D: to
match your CD/DVD-ROM drive letter).
3. At User Account Control, click Continue.
Skip this step if not prompted.
4. Select I Accept.
5. Connect your second monitor to the Adapter
using an HDMI cable (not included) and
turn it on.
6. Wait for the installation screens to end,
then plug the Adapter into the computer.
7. Restart your computer.